Table of Properties for Engineering Plastic Materials |
|||||
| PA 6 nat |
PA 6-66c black |
PA 66 nat |
PA 6 GF 20 black |
||
| Special Gravity |
Din 53479 ISO 1183 g/cm3 |
1,14 |
1,14 |
1,14 |
1,33 |
| Moisture Absorbtion in Air 50% R.H. |
% | 3 |
2,8 |
2,8 |
2 |
| Moisture Absorbtion in Water Till Saturation |
% | 9 |
8 |
8 |
6 |
| Tensil Stress at Yield |
Din 53455 ISO R 527 N/mm2 |
80* (60) |
90 (68) |
88 (68) |
190 (130) |
| Elongation at Break |
Din 53455 ISO R 527 % |
200* (60) |
160 (50) |
150 (40) |
8 (5) |
| Modulus of Elasticity |
Din 53457 ISO R 527 N/mm2 |
1800* (3000) |
2000 (3100) |
2000 (3100) |
6000 (8000) |
| Impact Strength Charpy 7,5j. |
Din 53453 ISO R 179 kj/m2 |
n.b. |
n.b. |
n.b. |
60 |
| Notched Impact Strength |
Din 53453 ISO R 179 kj/m2 |
n.b.* (5) |
18 (5) |
18 (5) |
10 (6) |
| Ball Identation Hardness |
Din 53456 ISO R 2039 N/mm2 |
80* (160) |
100 (170) |
100 (170) |
150 (210) |
| Rockwell Hardness |
ISO 2039*2 |
R 100 |
R 115 |
R 115 |
R 120 |
| Street at 1% Strain in 1000 H. |
Din 53444 ISO R 899 N/mm2 |
5 |
6 |
6 |
35 |
| Coefficient of Friction to Steel - Dry |
** |
0,42* (0,38) |
0,40 (0,32) |
0,42 (0,34) |
0,50 (0,40) |
| Next Page >> |
|||||